Introducing the UDI RC Rally Car. Available with either an attractive L 'type' or F 'type' body style.
Due January 2022.
1/16 Full proportion high-performance 4WD racing car, integrated ESP (Electronic Stability Program) , effectively correct yaw, easier to control. It embodies the high level of creativity in design and engineering that unleashed a stunning array of new technology, new innovation.
4CH 2.4GHz integrated receiver and electronic speed control (ESC)
Waterproof, dustproof design ESP (Electronic Stability Program) Low voltage cut-off and thermal overload protection, brake, BEC, LVC sensitivity, reverse speed, and motor timing settings.
Stunning New Body Prints
Two new striking colour schemes to choose between.
Waterproof and dustproof design
Torque: ≥2.3 kgf·cm @6V
Speed: ≤0.10 Sec/60° @6V
Angel eyes headlights
Lights can be controlled via the radio
Standard tires and drift tires
Equipped with two sets of different tires to adapt to different roads and can be changed freely
7.4V, 1200mAh (8.88Wh)
Rechargeable Li-ion Battery
Equipped with USB charger, which has various methods of charging and makes charging more convenient.
Charging methods: Phone Charger, Power Bank, Computer, Car Charger.
2.4GHz Racing Wireless Control System
Ergonomic steering wheel for precise control.
On-the-fly adjustable AVC gain for personalized handling.
Lightweight and ergonomic design for long bashing.
3 channel radio system.
2.4GHz connection built around DSMR technology.
Full-range telemetry capabilities.
Fully Integrated Aero Chassis.
Integrated chassis and diffuser for slick underside airflow.
Front and rear bumpers, separating the force generated by the violent impact.
Approximate Assembly Time: Less than half an hour
Ball Bearings: Full set
Transmission distance: About 60 meter
Running time: About 15 minutes
Battery Capacity: 7.4V, 1200mAh
Completion Level: Ready-To-Run
Differential: Two oil-filled gear
Drive Type: Forward/Brake/Reverse
Final Drive Ratio: 6.05:1
Front Track: 3.98″ (101mm)
Power Type: Electric
Gear Pitch: 0.5/0.7/1.0MOD
Ground Clearance: 0.39″ (10mm)
Internal Gear Ratio: 2.8:1.1
Motor Type: Brush Motor / Brushless Motor
Product Length: 11.81″ (300 mm)
Product Width: 5.91″ (150 mm)
Product Height: 3.93″ (100 mm)
Product Weight: 1.4lbs (635.5g)
Rear Track: 3.98″ (101mm)
Speed Control: Included
Spur Gear: 38T
Vehicle Type: On-Road
Wheelbase: 6.69″ (170mm)
1X RC Car
4X Spare Drift Tires
1X USB Charger
1X Instruction Manual
1X Small Tools
Requires 4 x AA batteries